Web Cleaning Static Control Systems

 |
Statik-Air 08 used for contact free cleaning with simultaneous extraction of visible dust and smaller particles.
Cleaning and elimination of electrostatic charges from material webs in the same process by using ionized compressed air. The integrated extractor ensures and optimum and residue free degree of surface cleaning.
|
The following ionizing bars can be combined with the Statik Air 08 housing"
- Ionizing bar EI RN
- Ionizing bar EI RD
- Ionizing bar EI VS
Compressed Air

Compressed air of a quality suitable for spraying applications must be available, i.e. it must be free of oil and water. The upstream installation of a service unit with integrated oil and water separator is recommended.
Web Speeds

The maximum web speed of the standard version is approx. 80 m/min. Higher speeds are available upon request.
Typical Applications

Plastics, furniture, paper, print, film, foil, automotive, electrical, and other industries.
Pulsed Operation

The application of Statik Air systems in pulsed operation can be recommended for media transported with intermediate distances/gaps.
Advantage: reduced costs (e.g. for compressed air). Pulsed operation can be controlled by external input to the switchgear, e.g. using photoelectric sensors, proximity switches or other potential free contacts.
Continuous Operation

The application of Statick Air systems in continuous operation can be recommended if the medium to be cleaned passed through continuously.
Switch Gear

The switch Gear is equipped with 3 functional modules:
- Power supply with power circuit breaker, motor circuit breaker for extruder fan, ON/OFF switch and control lamps. should it be necessary to connect two extractor fans to one switchgear, the relevant versions can be also be supplied.
- Solenoid valve for compressed air control with time delay switch for pulsed operation.
- High voltage power pack with 4 high voltage terminals. The watchdog integrated in the secondary are signals a drop below the corona inception voltage