One Point Ionizer
 |
We developed the One-Point-Ionizer for the neutralization of smallest parts. Emitting positive and negative ions, this unit neutralizes reliably electrostatic spot charges.
This ionizer is perfectly suited for mounting in places where there is little room. The plug of the electrode must simply be connected to the high-voltage transformer and the unit can be quickly set into operation without tools.
The One-Point-Ionizer has proven its value repeatedly in daily use, e.g. in the medical techniques. This unit can also be equipped with compressed air.
Attention: The pin carries high voltage and must not be touched while in operation.
|
Cleaning and Maintenance
We recommend regular cleaning of the electrode as dirt may cause considerable loss of efficiency.
Technical Data
| Order No: |
03.8002.0V3 |
| Temperature: |
From -150 °C up to +50 °C |
| Diameter: |
16 mm |
| Length: |
31 mm |
| High-Voltage Cable: |
Non-detachable high-voltage cable connected to the bar.
Coaxially shielded with high-voltage plug |
| Suitable Power Packs: |
All HAUG power packs according to their specifications |
*Subject to technical changes
Suitable Power Supply Units
| EN SL |
(230 V), Order-No.: 01.7780.000 |
(115 V), Order-No.: 01.7781.000 |
| EN SL LC |
(230 V), Order-No.: 01.7780.100 |
(115 V), Order-No.: 01.7781.100 |
| EN 8 |
(230 V), Order-No.: 01.7757.000 |
(115 V), Order-No.: 01.7756.000 |
| EN 8 LC |
(230 V), Order-No.: 01.7757.100 |
(115 V), Order-No.: 01.7756.100 |
| Multistat |
(230 V), Order-No.: 01.7760.000 |
(115 V), Order-No.: 01.7759.000 |
Max. Connected Load (Ionizing Unit Incl. High Voltage Cable)
| EN-SL |
Approx. 5 m |
| EN 8 |
Approx. 15 m |
| MULTISTAT |
Approx. 15 m |
Technical Illustration
Static Measuring & Testing Systems
