Ionizing Bar

The HAUG Ionizing Bar are a powerful and strong piece of equipment. Its construction satisfies all machine construction requirements and it has proven its value time and time again in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Product interfering surface charges can be removed reliably and effectively even at high operating speeds with a HAUG Ionizing Bar unit. The HAUG Ionizing Bar type EI-RN is a powerful and strong piece of equipment. Its construction satisfies all machine construction requirements and it has proven its value time and time again in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Product interfering surface charges can be removed reliably and effectively even at high operating speeds with a HAUG ionizing unit.

The coaxial high voltage plug connector of the HAUG SYSTEM X2000 offers a unique advantage in that the gas-tight, high voltage plug can be connected to the HAUG power supply unit easily and without the need for any tools. The highly flexible, coaxially screened safety cable connects the ionizing unit with the voltage supply.

The round construction of the ionizing bar type EI-RN permits rotatable and millimetre-exact adjustment in the direction of  travel of the material. The ionizing bar is safe to touch, while wear-resistant special electrodes guarantee long life.

Recommendations

HAUG Ionizing Bar is used with machines in the packing, foil, printing and textile industry, as well many other industrial applications. It is recommended that two ionizing bars are installed above and underneath the material web.

The Ionizing Bar is suitable for machine speeds up to 100 m/min.

Further Types of Bars Available

EI-RNE (03.8007.000)

As EI-RN, but with high voltage connection at the end of the bar for series connection of ionizer units.

EI-RA (03.8006.000)

Without high voltage cable, suitable for connection of a highly flexible, separate high voltage connecting cables (type VK-Norm, VK-ATL etc.)

EI-RNE (03.8008.000)

As EI-RA, but additionally with high voltage connection at the end of the bar for series connection of ionizing units.

Technical Specifications

Diameter:	18 mm / 20 mm
Length:	Available from 150 - 2500 mm. Other  lengths on request.  (The useful length corresponds to the total length less approx. 100 mm).
High voltage cable:	Types EI-RN, non-detachable high voltage cable, securely connected to the bar. High voltage cable available in standard lengths. Coaxially screened. From 1 m
Temperature:	Up to max. +50 C
Suitable Bar Holders:	Klick-Zack Order No.: 10.0004.000 Bar holder Order No.: 10.0301.000 Bar holder Order No.: 10.0227.000 Bar holder Order No.: 10.0268.000 Bar holder Order No.: X-0404 etc.
Ionizing Bar ER-RN:	Order No.: 03.8020.000

*Subject to technical changes

Suitable Power Supply Units

EN-SL	01.7780.000 (230 V)	01.7781.000 (115 V)
EN 8	01.7757.000 (230 V)	01.7756.000 (115 V)
MULTISTAT	01.7760.000 (230 V)	01.7759.000 (115 V)
EN 70	01.7701.000 (230 V)	01.7700.000 (115 V)

Max. Connected Load (Ionizing Unit Incl. High Voltage Cable)

EN-SL	Approx. 5 m
EN 8	Approx. 15 m
MULTISTAT	Approx. 15 m
EN 70	Approx. 2 x 15 m

Technical Illustration

Effective fFeld: 20 - 30 mm = Optimum Effective Distance

*Min. bending radius R50

Cable Length ± 50 (Customer Specification), Bar length ± 5 (Customer Specification)

*Effective length = bar length - 100 mm